Skip to content

Handling and storing sharp leather tools safely

Up to date as of 20 November 2026

Slips cause the trouble. Per the UK's workplace regulator, the blade most often cuts the user's other hand or fingers.1

That page is written for workplaces, not home benches. Its habits still carry over. Check local rules if you work in a shared workshop or run a business.

Cutting

  1. Cut away from your body. The regulator's training advice names this directly, with the dangers of blunt knives and typical accidents.1
  2. Keep your other hand clear of the line the blade will travel. The usual injury is to that hand or its fingers.1
  3. Use a sharp blade. A blunt one needs more force, and more force means less control. The edge checks tell you when it's time.
  4. Leave room. Everyone using a knife should have enough space to move freely.1
  5. Light the bench well. Work areas should have adequate lighting.1
  6. Wear shoes that cover your feet. A dropped blade can land on a bare foot, and a falling knife isn't worth catching.
Handling cycle for a sharp toolClear and light the benchCut away from your bodyCover the blade at onceStore it in a rack or sheath
Every cut starts and ends with the blade under control.

Between cuts

Don't leave a knife lying loose on a work surface. The HSE's advice is to prevent knives being left lying loose on work surfaces.1 Put the blade in its sheath, or down with the edge away from you and clear of the leather you're about to move.

A cover isn't only for storage. Use one whenever you step away, even for a moment.

Carrying

Don't walk about with an uncovered blade in your hand or pocket. For people who need to move around with knives, the HSE advises suitable belts or sheaths.1 At home, carry tools in a roll or box, with every edge covered.

Storing

  • Racks, slots or boxes. The HSE advises suitable storage, eg racks, slots, boxes near to where people work.1
  • Separate slots. Keep edges from touching each other. A thinner, sharper edge is more fragile.2
  • Dry, covered. Dry a blade before you cover it. Damp leather sheaths and tool rolls can hold moisture against the steel. Check the maker's care notes for your blade.
  • Out of reach of children. Store sharp tools in a closed cupboard or a high shelf, and lock it if children can reach it. Don't leave tools on a table after a session, even for a short break.

Sharpening safety

Sharpening raises its own risks: wet, slippery stones and a blade moving in your hand. Fix the stone so it can't slide. Keep your free hand behind the edge. Check the burr by touching off the edge, never along it.

Cover chemicals and compounds too. Strop compounds, oils and cleaners should follow the maker's label and safety data sheet, with ventilation where it says so, and be kept away from children.

Used blades and spare edges

Don't toss loose blades in the bin. For disposable blades, the HSE lists sharps containers as disposal points.1 Check what your local council accepts.

If a cut happens

Stop work and treat it. Press on any bleeding, and get medical help for a deep or heavily bleeding cut. Don't try to finish the job first.

Sharpening has its own pages, for curved blades and for skiving and head knives.

Where the facts come from

  1. Hand knives, Health and Safety Executive (UK)
  2. Sharpening, Wikipedia